Circular Locus Pilling Tester

The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and ble

Email: info@standard-groups.com

The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric  to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the humidity state.

 

Standard

GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles - Wear test of flat fabrics – Roll to mill

Test Parameters

Items	Parameters
Grinding head is in contact with grinding plane	≤0.2mm
The parallelism of grinding head and grinding plane	≤0.3mm
The relative movement trajectory of grinding head and grinding plane	40±1mm
Nylon brush surface is flush, its height difference	<0.5mm
Grinding plane reciprocating speed	60±1 times/min
Weight of grinding head	490cN±1%
Weight of heavy hammer	290cN±1%
Weight of hammer	100cN±1%
Select the number of times	1~9999

 

 

Features

1. Scientific mechanical structure, smooth rotation, no mechanical noise, no contact fatigue failure, suitable for long continuous operation.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.

 

Test Reference

Sample type	Pressure / cN	Number of fluff times	Number of pilling times
Synthetic fiber knitted fabric	590	150	150
Chemical fiber woven fabric	590	50	50
Military service (combed blended)	490	30	50
Combed wool fabric	780	0	600
Coarse wool fabric	490	0	50

Product Display:

Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.