Digital Pneumatic Stiffness Tester/Stiffness Tester Pneumatic

A plunger of 25.4 mm (1 in) diameter pushes the fabric through a 38 mm (1.5 in) diameter orifice for

Email: info@standard-groups.com

A plunger of 25.4 mm (1 in) diameter pushes the fabric through a 38 mm (1.5 in) diameter orifice for a distance of 57 mm (2.25 in) in 1.7 seconds, and the maximum force is recorded.

 

Application:

Fabric Stiffness Tester Pneumatic, used for testing the stiffness of fabric by the bending cycle test method of ASTM.

 

Test Procedure:

A plunger of 25.4mm (1 in) diameter pushes the fabric through a 38mm (1.5 in) diameter orifice for a distance of 57mm (2.25 in) in 1.7 seconds and the maximum force is recorded.

 

Specifications:

Provided with pneumatic cylinder

Digital force gauge: 50 kgf, 500N or 100lb (switchable) with peak-hold facility.

Lab compressed air is required.

 

Standards:

ASTM D4032

 

Product parameters:

Weight:18 kg

Power:0.4-0.7 Mpa

Width:500 mm

Depth:500 mm

Height:600 mm

 

 

Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.