Textile perspiration color fastness tester apply for testing perspiration resistance color fastness of all kinds of textile materials & dyeing, colorful textile and test for their perspiration resistance, waterproof, seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate resistance and other performance.
Product Information:
The fastness to perspiration tester is widely used in determining the color fastness to perspiration, sea water, saliva, distilled water and in textiles. The colored textile specimen is wet out using a simulated acid perspiration solution or others, and placed in contact with a multi-fiber strip. Extrusion to remove excess liquid of the combination, then subjected to a fixed mechanical pressure for a pre-determined period. Following incubation, the Perspirometer is removed and specimens and multi-fiber strip are observed the charge of color after drying respectively.
Testing Standards:
ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714
Accessories and Consumables:
1.Standard weights
2.Acrylic Plates
3.Sodium Chloride
4.Sodium Dihydrogen Orthophosphate·2H2O
5.Di-Sodium Hydrogen Orthophosphate·2H2O
6.Lactic Acid (USP 85)
Technical Parameters:
A.Provided with a stainless steel frame, 2 loading weights and 21 acrylic separator plates.
B.A stainless steel frame with a capacity of 20 samples of 10cm×4 cm.
C.Each sample held between acrylic separator plates.
D.Different weights shown with the corresponding test standards to avoid errors.
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
