-
Fabric Circular Sample Cutter >to cut out the circular test samples simply and accurately from materials including woven, nonwoven and knitted textiles, carpet, felts and foam.MPATextile Testing Instruments, Testing Equipment Manufacturer
MPATextile Testing Instruments, Testing Equipment Manufacturer
Fabric Circular Sample Cutter Application Scope:>MPATextile Testing Instruments, Testing Equipment Manufacturer
For sampling a variety of fabrics, paper and non-woven materials such as quasi-circular sample, which can be cut circular sample all kinds of wool, cotton, chemical fiber, knitting fabric. Used in the textile, paper, packaging, testing and scientific research industries.MPATextile Testing Instruments, Testing Equipment Manufacturer
Fabric Circular Sample Cutter product details:MPATextile Testing Instruments, Testing Equipment Manufacturer
Manual CD-like sheath includes a 60 times; 45cm cutting mat-like, yellow rotary cutter (with a spare blade and a straight knife (with spare rapid cutter and a spare blade).MPATextile Testing Instruments, Testing Equipment Manufacturer
MPATextile Testing Instruments, Testing Equipment Manufacturer
Fabric Circular Sample Cutter Features:>MPATextile Testing Instruments, Testing Equipment Manufacturer
1. textile fabrics, paper, cardboard and other items dedicated sampling unit of weight of the appliance;MPATextile Testing Instruments, Testing Equipment Manufacturer
2. Aluminum alloy material, thickness adjustable, cork mat to protect the blade not easy to damage;MPATextile Testing Instruments, Testing Equipment Manufacturer
3. The sample size has a wide range, high precision, easy operation;MPATextile Testing Instruments, Testing Equipment Manufacturer
4. Round cut sampler suitable 100cm2 times; 5mm thick cutting thickness;MPATextile Testing Instruments, Testing Equipment Manufacturer
5. With a cutting pad and four spare blades.MPATextile Testing Instruments, Testing Equipment Manufacturer
MPATextile Testing Instruments, Testing Equipment Manufacturer
Instructions:>MPATextile Testing Instruments, Testing Equipment Manufacturer
The sample will be cut in the rubber tile mat fabric, the fabric on the sampler disc, pull out the sampler on the locking device, rotated about 90 degrees, hand held onto the jacket in one hand and hold the corrugated hand wheel, and exert a certain pressure, and then hand wheel clockwise wave (angle greater than 90 degrees), then the circle and cut the sampleMPATextile Testing Instruments, Testing Equipment Manufacturer
Immediately locking device after using the sampler, rotate to its original position, the blade is not exposed, so as not to hurt the hand and other items.MPATextile Testing Instruments, Testing Equipment Manufacturer
MPATextile Testing Instruments, Testing Equipment Manufacturer
Structure and Adjustment:>MPATextile Testing Instruments, Testing Equipment Manufacturer
Double blade cutter blade to a total of four, the circular external four equal parts, the blade can be replaced, the specific operation is: Loosen the Phillips screws (four screws on each piece), remove the blade plate and sampling blade change a new blade, the pressure on the blade plate, note the blade clockwise tangential port, and make four incisions in the same plane, and then tighten the cross screwMPATextile Testing Instruments, Testing Equipment Manufacturer
Instrument has ruled the bottom notch, for fixed samples, easy to cut, to prevent sample slippage.MPATextile Testing Instruments, Testing Equipment Manufacturer
MPATextile Testing Instruments, Testing Equipment Manufacturer
Precautions:>MPATextile Testing Instruments, Testing Equipment Manufacturer
1. The instrument is with sharp blade edge, not put your hand on the bottom, in order to avoid damage.MPATextile Testing Instruments, Testing Equipment Manufacturer
2. The instrument should be cut to take the rubber mat samples, wipe clean the instrument when it is not in operation, on the meter box to avoid damage.MPATextile Testing Instruments, Testing Equipment Manufacturer
MPATextile Testing Instruments, Testing Equipment Manufacturer
Technical Parameters:>MPATextile Testing Instruments, Testing Equipment Manufacturer
1. Sampling area: 100cm2;MPATextile Testing Instruments, Testing Equipment Manufacturer
2. Maximum cutting thickness: 5mm;MPATextile Testing Instruments, Testing Equipment Manufacturer
3. Dimensions: 160 times; 160 times; 110mm;MPATextile Testing Instruments, Testing Equipment Manufacturer
4. Weight: 2kg.
Get a Quote
Your email address will not be published. Required fields are marked *